hr@vistrainspection.com+91 XXXXX XXXXXMon–Sat 9:00–18:30 · 24×7 shutdown support
Registration FREE for freelancers, clients & collaborators
Vistra Inspection Services and Consultants

Ultrasonic Testing (UT)

High-frequency sound waves find internal defects in welds, forgings, castings and plates.

Ultrasonic testing sends high-frequency sound (typically 1–10 MHz) into the material through a probe and couplant. Reflections from cracks, lack of fusion, slag, laminations or the back wall are shown on the flaw detector screen, which lets the technician locate and size the defect.

UT is the preferred method for thick welds, forgings, shafts and rolled plates. It needs access from only one side, gives an immediate result and has no radiation hazard. Vistra technicians perform straight-beam and angle-beam UT, lamination scanning of plates and UT of forgings to the specified acceptance standard.

Applications

  • Butt welds in pressure vessels, structures and piping
  • Forgings: flanges, shafts, rings, crankshafts
  • Castings: valve bodies, pump casings
  • Plate lamination scanning
  • Bolt and stud testing

Standards & acceptance criteria

ASME Sec V Art. 4 & 5ASTM A388, A435, A578, E164EN ISO 17640, ISO 11666IS 4260, IS 2595

Industries that use UT

Book UT testing

NDT Testing
Forging Manufacturers

Forging UT to ASTM A388

Ultrasonic testing of shafts, rings, flanges and discs to ASTM A388.

₹7,500 per shift
NDT Testing
Fabrication & Heavy Engineering

Weld NDT Package – UT + MPT (Fabrication)

Level II UT and MPT of structural and machine-frame welds with reports.

₹8,500 per shift
NDT Testing
Wind & Solar Energy

Wind Tower Section Weld UT & Flange Check

UT of longitudinal and circ welds and flange flatness checks.

₹8,500 per shift

Learn UT

Our course Ultrasonic Testing (UT) Level I & II (10 days) covers theory, practicals and code acceptance criteria.

Frequently asked questions

Is UT carried out at our factory?

Yes. Our technicians bring calibrated UT equipment to your shop or site anywhere in India; testing can also be done at partner laboratories.

Who performs UT for Vistra?

Technicians qualified to ASNT SNT-TC-1A / ISO 9712 Level II, with Level III review of procedures and reports.

How is UT priced?

Per shift or per man-day on site; radiography per exposure and PMI or hardness per point. See the Requirements Shop for indicative rates.

Need an inspector, NDT technician or QA/QC consultant?

Tell us the product, code, location and dates – we respond within one working day.

All 36 States & UTs780 districts covered
Qualified inspectorsASNT / ISO 9712 Level II & III
Reports in 24 hoursPhoto-backed, code-referenced
Secure paymentsUPI · Cards · Net banking
Install the Vistra appFaster access to inspectors & requirements